Wondering how to lubricate garage doors? There are a lot of different elements to your garage doors – such as hinges, springs, rails, or a chain that, due to the friction, could make a noise each time you open or close the garage door. The good news is that you can easily deal with this issue easily – all that you need to do is grease the garage door parts.

To lubricate garage doors, you need to follow 5 steps. Here’s how:

1. Clean the tracks of the garage foor with a damp cloth so that they’ll be completely dirt-free.
2. Apply lubrication to the garage doors parts such as the garage door springs, and garage door rollers using lithium grease as a garage door lubricant instead of WD-40 or oil. The latter would lubricate the garage door just fine, but it would attract dirt later on, which would prove counterproductive.
3. Lift up the garage door a little bit, and spray the garage door lubricant on the hinges. There’s no need to use too much of it – a single spray should be enough.
4. Open and close your garage door to see if the garage door hinges are still making noises and apply additional lubrication as needed. If there’s still a noise coming from them, you might need to replace your garage door hinges. However, the process could be dangerous, which is why we don’t recommend doing it on your own; instead, contacting a skilled technician is a better idea.
5. Lastly, apply lubrication to the upper part of the rail. Oftentimes there’s not enough lubrication, and as a result, the chain causes a lot of noise every time you open or close the door. You might have trouble accessing the rail, which is why a step ladder will come in handy once again.

What if the Lubrication of Garage Door Parts Doesn’t Help?

If you discover that lubricating and greasing garage door parts brings no results and the issue of noise persists, you might need to replace it. However, if you aren’t absolutely certain that you know how to do that, it’s best to leave this job to trained specialists. It’s not only a matter of damaging your garage door parts even further; if you aren’t careful, some elements could fall-off and cause an injury or even death. Regardless of whether it is the springs or perhaps hinges that need replacing, we recommend contacting a technician.

Remember, we recommend using only lithium grease as a garage door lubricant instead of WD-40 or oil. WD-40 or oil would lubricate the garage door just fine, but it would attract dirt later on, which would prove counterproductive.

Why Is My Garage Door Squeaking?

Though your garage can have multiple functions – you can park your car, store items that you don’t want to throw away just yet, or make it your small repair center, the garage door could also be a source of ungodly noise. There could be multiple reasons that might cause this unfortunate state of affairs, such as improper maintenance, wear, tear, or simply a noisy type of garage door opener.

You most likely don’t pay too much attention to your garage door until it causes you an inconvenience. Although it could still close and open, any type of movement might be accompanied by a terrible noise that would disturb your family or maybe even neighbors. Contacting a technician with a great deal of experience certainly wouldn’t be a bad idea, but there’s a good chance that you’ll be able to tackle the problem without anyone’s help.

Bent Garage Door Tracks

A bent track could be the reason why you are experiencing problems with your garage door. You might be able to close and open the door, but if this process is accompanied by a rubbing sound, the track could be bent.

Loose Garage Door Parts

One of the garage door parts could be loose, which could be causing a lot of noise during the opening and closing of your garage. Identifying which component is responsible for the clamor – whether it’s garage door rollers, nuts, or chain, to name just a few, could be pretty time-consuming. However, your task will be a bit easier if you know what type of sound corresponds with which of the garage door’s moving parts.

If there is a rattling sound when you open or close the door, it is most likely due to the loose nuts or bolts. That’s one of the most common causes of noisy garage doors, with a relatively simple solution – use a ratchet to make sure that no nut or bolt is loose. However, don’t use too much force, or you might damage the door and achieve the opposite effect from the intended one.

Worn Out Garage Door Rollers

On the other hand, a squeaking sound could indicate that hinges or rollers are the responsible parties. Because of their wear and tear, the entire door could additionally shake while it opens and closes. If the bearings of the garage door rollers are dirty, they will become worn much more quickly, which is why it is a good idea to check their condition regularly.

If they are worn-out, you should consider replacing the garage door rollers – nylon ones are worthy of recommendation, as they are significantly quieter, but at the same time, they don’t need to be oiled regularly. This way, you would not only successfully deal with the problem, but you could also forget about the garage door rollers’ maintenance. Are there any downsides to this solution? Unfortunately, they are also more costly.

Garage Door Chains

If you can hear a characteristic “slapping” sound while you open or close the garage door, it could indicate that the chain is the culprit. If that’s the case, fixing this issue could be as simple as tightening it.

Could the Issues With Garage Doors Be Caused by Something Else?

It also could be the case that you lubricate all the garage door parts, tighten all the bolts, and there are no apparent problems, yet still, there’s a noise. In this case, the garage door opener might be to blame. Chain drive garage door openers are typically the loudest, which is why if you want to get rid of the noise, you should consider installing a belt drive garage door opener instead.

Conclusion

If you value peace and quiet in your home, you might be surprised that your garage door could be a source of disturbance in your day-to-day life. No one enjoys the noise caused by the opening and closing of the garage doors, though there is not a single solution to this problem.

Your garage door is made of many moving parts, which means that the issue of a noisy garage door could be fixed by tightening all the bolts and nuts, though don’t use excessive force, or you could damage the mechanism.

However, if it doesn’t bring any results and loose elements are not the cause of your problems, you should lubricate the garage door’s moving parts. Similarly, as in the previous step, you should inspect from where exactly comes the noise, and then just lubricate a garage door element that causes the clamor. It could be the springs, the hinges, or other moving parts.

Still, lubrication of garage doors might not be enough, and you might need to replace some elements. After reading this article, we hope that you now know what could be causing the disturbance and how to lubricate your noisy garage door.

‍